Grote boosdoener bij de opname van geluid is heel vaak de wind. Daarom verkoopt Art & Craft windkapjes in alle vormen en kleuren. Daarnaast vind je bij ons ook shockmounts, sticky pads om dasspeld microfoons te bevestigen en nog veel meer.
The DeadCat GO is a high-performance windshield for the RØDE VideoMic GO. Designed for use in windy recording environments, it features high-quality artificial fur that is acoustically transparent. High-performance windshield for the RØDE VideoMic GO Acoustically transparent synthetic fur
The DeadCat is a high-performance windshield for the RØDE VideoMic. Designed for use in windy recording environments, it features high-quality artificial fur that is acoustically transparent. High-performance windshield for the RØDE VideoMic Acoustically transparent synthetic fur
The Mini Boompole is a high-quality professional boompole that is compact and lightweight, making it highly convenient for location recording. The Mini Boompole allows you to mount your microphone securely and swivel it in a range of directions to easily follow your sound source. It weighs just 580 grams and has a reach of 2 metres. Lightweight aluminium construction 2m (6.5') reach Ultra-smooth extension and retraction system Easy-to-use lock/release mechanism
The DeadCat VMPR is a high-performance windshield for the RØDE VideoMic Pro. Designed for use in windy recording environments, it features high-quality artificial fur that is acoustically transparent. High-performance windshield for the RØDE VideoMic Pro Acoustically transparent synthetic fur
The MiCon connector system provides seamless integration between the RØDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon-5 is designed to connect to a standard 3-pin XLR with P48 phantom power. MiCon connector for standard 3-pin XLR devices
De Røde Invisilav is ontworpen om lavalier microfoons subtiel te kunnen verbergen. De zachte constructie absorbeert bijgeluiden en vibraties, terwijl het wijde en platte profiel zich van de externe elementen ontdoet en zorgt voor een zeer veelzijdige toepassing. De Invisilav wordt geleverd met bevestigingsmateriaal, dat zich eenvoudig hecht aan zowel stof als huid. Daarnaast zijn ze gemaakt van medisch huidvriendelijk materiaal, waardoor deze bij iedereen irritatie vrij is toe te passen.
MINIFUR-LAVDeluxe Lavalier WindshieldThe MINIFUR-LAV is an artificial fur windshield that is designed to fit the RØDE Lavalier, Lavalier GO and RØDELink LAV microphones. It signifcantly reduces wind noise when using a lavalier microphone windy conditions. The MINIFUR-LAV is supplied as a pack of three. High-performance windshield for RØDE headset microphones For use in high-wind conditions Supplied in a pack of three
The Boompole is a precision-balanced professional boompole for location recording. Machined from high-grade, lightweight aluminium, the Boompole allows you to mount your microphone securely and swivel it in a range of directions to easily follow your sound source. It has a reach of 3.3 metres and weighs 980 grams. Lightweight professional boompole 3m (10') reach Ultra-smooth extension and retraction system Easy-to-use locking mechanism
Rode PG-1 - Cold Shoe Pistol Grip De PG1 cold shoe pistol grip is een handige en ergonomische manier op uw RØDE VideoMic of Stereo VideoMic te gebruiken los van uw camera. Een handige 3/8 schroefdraad aan de basis zorgt voor een makkelijke verbinding met een boompole of microfoon standaard. Uitgerust met kabelmanagement. Klik hier voor meer informatie O.a. geschikt voor - Rode Stereo Video Microfoon- Rode Video Microfoon
The Micro Boompole is a precision-balanced boompole that offers excellent performance with a convenient and portable form factor. Providing a reach of 2.1 metres, with an ergonomic grip, intuitive lock/release system, and precision-balanced anodized aluminium construction with a total weight of just 396 grams, it's ideal for a wide range of filmmaking scenarios, pairing particularly well with RØDE VideoMics. Compact and lightweight boompole Precision-balanced and lightweight design 2m (6.5') reach Easy-to-use lock/release mechanism
The WS6 is a high-performance windshield for shotgun microphones. Designed for use in windy recording environments, the WS6 combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber base prevents any wind noise from entering the rear of the microphone pickup area. Suitable for the RØDE NTG1, NTG2, NTG4 and NTG4+ as well as any shotgun microphone with a maximum slot length of 160.5mm and a diameter of 21-22.5mm. High-performance windshield for RØDE shotgun microphones Compatible with any shotgun microphone with a maximum slot length of 160mm and a diameter of 21-22.5mm Suitable for NTG1, NTG2, NTG4 and NTG4+ shotgun microphones Acoustically transparent synthetic fur Easy to fit and remove
The WS7 is a high-performance windshield for the RØDE NTG3 and other compatible shotgunmicrophones. Designed for use in windy recording environments, the WS7 combines an open-cell foam surround with an outer layer of acoustically transparent artificial fur. A rubber base prevents any wind noise from entering the rear of the microphone pickup area. High-performance windshield for RØDE NTG3 Compatible with any shotgun microphone with a maximum slot length of 186mm and a diameter of 19-20mm Suitable for the NTG3 shotgun microphone Acoustically transparent synthetic fur Easy to fit and remove
The WS12 is a professional-grade windshield for the RØDE VideoMic GO II microphone. Featuring open cell foam covered by synthetic fur, it is designed to minimise wind noise and plosives when recording. Includes a wind seal made of synthetic rubber to block any unused sockets (USB-C or 3.5mm) on the microphone, preventing wind entering the rear of the microphone. High-performance windshield for RØDE VideoMic GO II For use in high-wind conditions Acoustically transparent synthetic fur Easy to fit and remove
The DeadCat VMP+ is a high-performance windshield for the RØDE VideoMic Pro+. Designed for use in windy recording environments, it features high-quality artificial fur that is acoustically transparent. High-performance windshield for the RØDE VideoMic Pro+ Acoustically transparent synthetic fur
The Micro Boompole Pro is a unique, modular boompole that allows location sound engineers to capture audio in confined or difficult spaces. Optimised for use with the VideoMicro microphone, the Micro Boompole Pro’s three sections combine for a maximum reach of 2.2 metres. Using an industry standard 3/8” thread, additional sections can also be used to extend the Micro Boompole Pro to reach to over 3.7m (12'). Ultra-lightweight modular boompole 2.2m (7.2') reach, extendable to 3.7m (12') Optimised for VideoMicro
The WS-LAV is a high-quality foam windshield that is designed to fit the Lavalier, Lavalier GO and RØDELink LAV microphones. It helps prevent wind noise and hard plosive sounds overloading the microphone capsule. The WS-LAV is supplied in a pack of three. Note the WS-LAV is not compatible with the Lavalier ME. High-quality foam windshield for RØDE lavalier microphones Reduces wind noise and plosives Supplied in a pack of three
The MiCon connector system provides seamless integration between the RØDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon-2 is designed to connect to a standard 3.5mm stereo mini-jack, with a power supply of 1V minimum. MiCon connector for a standard 3.5mm stereo mini-jack
The Micro Boompole Pro is a unique, modular boompole that allows location sound engineers to capture audio in confined or difficult spaces. Optimised for use with the VideoMicro microphone, the Micro Boompole Pro’s three sections combine for a maximum reach of 2.2 metres. Using an industry standard 3/8” thread, additional sections can also be used to extend the Micro Boompole Pro to reach to over 3.7m (12'). Ultra-lightweight modular boompole 2.2m (7.2') reach, extendable to 3.7m (12') Optimised for VideoMicro
Rode VideoMic Rode is inmiddels uitgegroeid tot een van de belangrijkste producent en leverancier van microfoons. De microfoons worden in Australie in de eigen Rode fabriek ontworpen en geproduceerd. Moderne productie methoden zorgen er voor dat de de microfoons aan zeer hoge kwaliteitsnorm voldoen en de productiekosten toch laag blijven. Daardoor zijn Rode microfoons interressant geprijsd en kwalitatief vergelijkbaar met veel duurdere microfoons in de markt.
The MiCon connector system provides seamless integration between the RØDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon-5 is designed to connect to a standard 3-pin XLR with P48 phantom power. MiCon connector for standard 3-pin XLR devices
The Boompole Clips are designed to quickly and easily mount onto any compatible RØDE boompole to secure the microphone lead and minimise any movement. Supplied in a pack of 5. Clip for securing cables to boompoles Supplied in a pack or 5
The MiCon connector system provides seamless integration between the RØDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon 3-metre cable is shielded and reinforced with heavy-duty Kevlar. Cable for use with the MiCon connector system 3m (10') or 1.2m long Black (also comes in pink)
The MiCon connector system provides seamless integration between the RØDE HS1 headset, PinMic and Lavalier microphones and a wide range of wireless systems. The MiCon-10 is designed to connect to MIPRO transmitters with 4-pin mini XLR connector. MIPRO is a registered name and trademark owned by MIPRO Electronics. MiCon connector for select MIPRO wireless devices
The Universal Blimp Mount is an interchangeable mounting adaptor for the RØDE Blimp windshield shock mounting system. It allows for easy mounting of the Blimp onto a boompole, stand or any other mounting device with a 3/8-inch thread. Universal lightweight mounting adaptor for RØDE Blimp Allows for easy mounting of the Blimp onto any boompole, boom stand or any other mounting device
Trustpilot
